Skip to content
WaterHeating.caby CANRO Heating & Cooling

Rheem · Series

Rheem ThermaForce condensing tankless

The Rheem ThermaForce is a fully condensing indoor gas tankless water heater published by Rheem at up to 0.90 UEF with a single-pass Labyrinth heat exchanger, four moving parts, a built-in illuminated touchscreen control and wireless RF cascading.

Current seriesSold in CanadaGas tanklessNatural gasPropaneresidential

Series facts

System type
Gas tankless
Efficiency
UEF 0.9
Energy
Rheem lists the ThermaForce in natural gas and propane. WaterHeating.ca does not perform field fuel conversions; the model is ordered for the fuel supplied.
Venting
Fully condensing indoor tankless: Rheem states the ThermaForce has a moveable combustion air intake (left or right) and the ability to flex vent in existing B-vent. As a condensing unit it produces condensate and needs a drain; the installation manual governs vent materials, lengths and condensate handling.
Models documented
1

Rheem publishes up to 0.90 UEF and ENERGY STAR qualification for the ThermaForce condensing tankless family. UEF is the current federal metric; WaterHeating.ca does not convert it to a legacy EF.

About the ThermaForce condensing tankless

The Rheem ThermaForce is a fully condensing indoor tankless water heater that Rheem publishes at up to 0.90 UEF with ENERGY STAR qualification. The published model is CRTGH-L199i at 10.1 GPM in a 17 inch wide by 29 inch high by 10 inch deep cabinet, listed in both natural gas and propane. Rheem describes a single-pass Labyrinth heat exchanger with an integrated copper waterway and states the unit stands up to extreme hard water applications.

The published design reduces the moving parts to four: the fan, mixing valve, gas valve and damper. Rheem states the units use universal shared platform parts for easier diagnosis and service, and support wireless cascading over RF to balance the workload of each unit, which Rheem notes needs no Wi-Fi. The unit carries a built-in illuminated touchscreen control panel, extra-long pipe fittings with notched sides, a moveable combustion air intake for left or right routing, and the ability to flex vent in existing B-vent.

WaterHeating.ca records the efficiency as the published UEF and does not convert it to a legacy EF. Tankless sizing depends on the incoming water temperature, the temperature rise and simultaneous fixture demand, so a model is selected from a heat-loss and flow assessment rather than from the GPM figure alone. Whether CANRO supplies a specific ThermaForce model and performs a gas tank-to-tankless conversion is confirmed at consultation.

Highlights

  • Rheem publishes up to 0.90 UEF and ENERGY STAR qualification
  • Single-pass Labyrinth heat exchanger with integrated copper waterway
  • Only four moving parts: fan, mixing valve, gas valve and damper
  • Built-in illuminated touchscreen control panel
  • Wireless RF cascading to balance the workload of multiple units; no Wi-Fi required
  • Moveable combustion air intake (left or right) and flex venting in existing B-vent
  • Residential 15-year heat exchanger warranty, 5-year parts, 1-year labour

Rheem publishes a residential 15-year heat exchanger warranty, 5-year parts and 1-year labour for the ThermaForce, and a commercial 5-year heat exchanger and 5-year parts warranty.

Models

ThermaForce condensing tankless models

One canonical page per model. Capacity and fuel variants stay on that page.

Rheem · Gas tankless

Rheem ThermaForce CRTGH-L199i

CurrentSold in Canada
Max input
Flow at unspecified rise rise
10.1 GPM
Uniform Energy Factor (UEF)
0.9

The Rheem ThermaForce CRTGH-L199i is an indoor condensing natural gas tankless water heater published by Rheem at up to 0.90 UEF and 10.1 GPM, with a single-pass Labyrinth heat exchanger and four moving parts.

Natural gasPropaneCondensing, PVC/CPVC/PP

Fault codes

ThermaForce condensing tankless codes and status lights

No codes documented for this series yet.

Manuals

Official documents

Where CANRO provides on-site service

On-site service is currently offered across Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, Maple Ridge, Pitt Meadows, White Rock, Tsawwassen; plus Anmore, Belcarra, Lions Bay, Bowen Island, Abbotsford with travel or ferry arrangements confirmed by phone. Everything else on this site is reference information you can use anywhere in Canada.

See all service areas

Frequently asked questions

What efficiency does Rheem publish for the ThermaForce?

Rheem publishes up to 0.90 UEF with ENERGY STAR qualification for the ThermaForce condensing tankless family. UEF is the current federal metric, and WaterHeating.ca does not convert it to a legacy EF.

What is unique about the ThermaForce design?

Rheem describes a single-pass Labyrinth heat exchanger with an integrated copper waterway and states the unit has only four moving parts: the fan, mixing valve, gas valve and damper. It also lists wireless RF cascading, a built-in illuminated touchscreen control and a moveable combustion air intake.

Does the ThermaForce need a condensate drain?

Yes. It is a fully condensing unit, so it produces condensate and needs a drain. Rheem states the unit can flex vent in existing B-vent, and the installation manual governs the approved vent materials, lengths and condensate handling.

Talk to a water heater technician

Describe what the water heater is doing and get a straight answer about the next step.

On-site service in Metro Vancouver, BC. Call to check availability.

Call 604-359-1081Get Estimate