Bradford White service
Bradford White: 60 °C storage, 49 °C at the tap: the mixing valve that makes both true
Supply and installation of thermostatic mixing valves on storage tanks so water can be stored at 60 °C to limit bacterial growth while fixtures stay at the 49 °C BC Plumbing Code limit, including ASSE-listed valves and temperature verification.
Quoted after assessment
Pricing for this service is confirmed in writing after CANRO assesses the equipment and property.
Where CANRO provides on-site service
On-site service is currently offered across Metro Vancouver: Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Delta, Langley, Port Moody, Port Coquitlam, Maple Ridge, Pitt Meadows, White Rock, Tsawwassen; plus Anmore, Belcarra, Lions Bay, Bowen Island, Abbotsford with travel or ferry arrangements confirmed by phone. Everything else on this site is reference information you can use anywhere in Canada.
Mixing Valve Installation for Bradford White water heaters
BC's plumbing code limits shower and bathtub water to 49 °C while storage is commonly kept at 60 °C; the thermostatic mixing valve reconciles the two. Some models ship with a valve fitted (Bradford White lists ASSE valves with its RG255H6N and RG1PV55H6N), and where one is added in the field it must be an ASSE-listed valve set and tested with the tank and fixture temperatures measured together.
The service supplies and installs the valve on the hot-water supply, verifies the setting at the fixtures, and checks the tank temperature, so the result is a measured 49 °C delivery rather than a guess at the dial.
Working on a Bradford White unit? Have the model number from the rating plate and any code or flash pattern ready. Browse Bradford White series, models and fault codes to find yours; the details carry through when you request service.
What's included
- ASSE-listed thermostatic mixing valve matched to the flow
- Installation on the hot-water supply line
- Temperature verification at tank and fixtures
- Compliance note against the 49 °C fixture limit
Not included
- Replacement of failed valves found during the visit is included in the quoted work; repiping beyond the valve is quoted separately
Process
How it works
- 01
Assess
Tank temperature, fixture limits and flow are checked.
- 02
Install
The valve is installed and set to 49 °C delivery.
- 03
Verify
Temperatures at the tank and the fixtures are measured and recorded.
Why CANRO
4.9★
4.9 from 85+ Google reviews
As published by CANRO Heating & Cooling on canroheat.ca, checked September 7, 2026.
Technical Safety BC licensed gas contractor
Gas-fitting licence LGA0043870 and boiler licence LBP0046450, as published by CANRO.
Source: canroheat.ca
Serving Metro Vancouver since 1999
Founded by George in 1999, as stated on canroheat.ca. Boiler and hydronic expertise is CANRO's, not this domain's.
Source: canroheat.ca
Red Seal HVAC, WorkSafeBC and liability insured
As stated on canroheat.ca. Bonding and association memberships: not published.
Source: canroheat.ca
Frequently asked questions
Do I need a mixing valve?
When the tank stores at 60 °C and fixtures are limited to 49 °C, yes. Electric storage thermostats are set at 60 °C by code, which makes the valve the standard safety measure.
What if my valve fails?
A valve that can pass full storage temperature needs immediate attention: it is replaced and the delivery re-verified before use.
Get a ballpark estimate in two minutes
Answer a few questions for a CAD range before you share any contact details.
On-site service in Metro Vancouver, BC. Call to check availability.
Related services and help
- Water Heater InstallationCANRO Heating & Cooling installs gas and electric storage tanks, heat-pump water…
- Water Heater MaintenanceMaintenance for gas, electric, heat-pump and tankless water heaters in Metro Van…
- Water Heater InspectionAn inspection that follows what the manufacturer's manual actually requires for …
- Look up a fault codeDocumented meanings by brand and control
- Tank vs tankless guideCapacity, efficiency and installation
Sources and verification
- CANRO — Water heater installation in Metro Vancouver · Canadian source · accessed September 7, 2026
- CANRO — About (free estimates, diagnostic fee wording) · Canadian source · accessed September 7, 2026
Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.